Near- electric alarm watch manual|Nantong Tianyuan security equipment Co.,Ltd

Near- electric alarm watch manual　

Near- electric alarm watch products , also known as : near electric alarm watch, almost electric alarm, test power watches, electric watches, electric shock pre- alarm watches, alarm watches, electrostatic , static alarm, static alarm watches.

Near- electric alarm watch with electric shock pressure pre- alarm function:When you wear a watch near- live electronic alarm and strayed into areas ( or to be mistakenly charged body , with a pole time ) to a certain distance , near- electric alarm watches can be issued a continuous alarm sound to alert your attention to the charged body A potential hazard . When you hear the alarm sound , should be promptly charged away from the high pressure region until the near- electric alarm watch to stop alarm sound .Near- electric alarm watch this electric shock pre- alarm function (Also known as : near electric alarm), can prevent the wrong impression and errors caused by electric shock casualties .

Near- electric alarm watch with experience in low voltage power function: it can be exposed to lead in non- cases, to detect the firing line over AC 110V has no electricity . OrCables and wires for low-voltage detection of broken contacts . Or to check theft of electricity users within the wire to the wall .

Near- electric alarm watch is a high-voltage electric power operations staff better security warning type of auxiliary equipment .

1 , main technical data :

1 , Voltage: AC 110V - 500KV

2 , Type : common, waterproof, explosion-proof type .

3 , alarm distance : meet the "National Grid electricity safety regulations ( part of the power lines ) ( substations and power plants, electrical parts) (Tentative ) and modify that " the provisions on safety distance requirements .

Voltage (KV)	Safe distance (m)	Alarm distance (m)
10 (6)	0.70	0.80-1.40
20, 35	1.00	1.20-2.50
63 ( 66) , 110	1.50	2.00-4.00
220	3.00	3.50-5.50

4, alarm volume :>65dB (A) (0.3m Office)

5 Alarm current:< 2.5mA

6, quiescent current :<4μA

7 waterproof rating : 3bar

Second, product characteristics:

1Electric shock pre- alarm (Near electric alarm) .High-pressure pre- alarm function with electric shock , low power features with experience . Near electrical alarm circuit design our own dedicated near the fourth generation of electrical alarm circuit . The strong anti-interference performance , long life , easy to damage the circuit .

2 , the alarm system 24 hours .The alarm status is monitored 24 hours , once the wearer unconsciously strayed live in the area , the alarm immediately sound alarm issued to remind staff to wear attention to the existence of hazardous live parts to play to prevent mistakes as delusions and injuries caused by electric shock Accident.

3, alarm for a wide range of voltage .As long as the wearing of an alarm can be from 10KV-500KV can alarm and alarm distance are met DL408-91 " electrical safety rules "in respect of the provisions of the safe distance requirements can also be used for non- shielded cable and low voltage cable fault Junction detection.

4, water , earthquake resistance.Each watch near- electric alarm watch in the factory have been waterproof detector test , to ensure that electrical workers are working in the field under harsh environment can normally when the alarm warning .

5, low-voltage power function with experience .It can be exposed to lead in non- cases, to detect the firing line over AC 220V have charged . Or broken wires for cable and low voltage detection contacts . Or to check theft of power users to the wire walls .

6 watches for accuracy, small size, easy to wear .Part of the alarm time using imported movement , timing accuracy, maintenance of small . Small size , attractive appearance, easy to wear .

Third , use and wear :

1 , must be carried out before use low-voltage AC 220V electrical inspection test to ensure that the alarm is in normal working condition. ( AC 220V alarm FireWire surface distance is about 1cm-3cm alarm sound alarm to note that the alarm is in working condition ) .

2 , the right to wear watches, near- electric alarm means : The near- electric alarm watch worn directly on the left wrist or right wrist ( case required direct contact with human skin ), so watch for the body's outer surface . Deduction against the surface of the watch inside the body .

3, while you work and successive sudden alarm alarm sounds , indicating this time around there is pressure on your body you live dangerous, then do not tamper with and stop work, carefully investigate the cause and eliminate risk before it can Continue to work.

4, near- electric alarm watch alarm from the factory is measured under conditions of no interference in the use of multiple charged body should pay attention to the synthesis of electric field and electric field effects on the surrounding objects . Particular transformer tables, electrical cabinet substation grounding will reduce the warning distance .

5 , prohibiting wet in the rain alarm and the alarm after the post with water use . If the alarm is water soaked or wet , dry cloth to wipe clean, alarm , especially between the case and the table should wipe clean the glass . Experience in low voltage electrical test pass before using.

4 , alarm and timer

1 , the alarm independently developed by our company with independent intellectual property rights of private near electrical alarm circuit , reliable and accurate alarm , alarms and long service life . Some alarm about 2 -3 years in alarm batteries need to be replaced (using high frequency alarm , need to replace the battery is shortened ) .

2 watches for parts of the original movement with stable performance , less maintenance, timing is accurate. Some time around 3 years -4 years time to replace the battery .

3 , alarm and time using the same type of battery , easy user replacement . The model of battery : SR626SW

Note:ProShockNantong Tianyuan for the safety equipment Co., Ltd in China and North America are registered trademarks (DingDingIs a registered trademark in China ) , no unit or individual without the authorization shall not use the trademarks and products bearing the trademark image , otherwise the company will pursue its legal responsibility related !